Hi,

i have a question about migration from WinCC flexible (MP377) -> TIA portal V16 (TP1500). I have already migrated project with new panel but i have some errors. In WinCC Flexible was set visibility range (from -128 to -128) and  this is problem for TIA portal. How can I solve this error? i need to migrate project from old panel to new panel 1:1.

Thanks for each answer.

 Hello,

U_26c8104c-9c90-486b-93d3-b640f99f12d5

Hi,

i have a question about migration from WinCC flexible (MP377) -> TIA portal V16 (TP1500). I have already migrated project with new panel but i have some errors. In WinCC Flexible was set visibility range (from -128 to -128) 

 

 Negative values in char data type not accepted by TIA program . Changing these values into positive to be accepted by TIA program.

Hi,

thanks for answer. Yes, I know it, but is there solution how to solve this problem? I have project only from old HMI panel and nothing else. And in old project (WinCC flexible) in visibility was only negative values.

Hello,

There is no other option.

You can change the values into positive  and test HMI program,after that post your feedback.

Hi,

oh thanks for your advise . I will try it.