Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MIGRATION OF A PM AQUA SOFWARE

Created by: JGA at: 6/25/2007 11:09 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/25/2007 11:09 AM	Rate (0)
JGA Regular Member Joined: 6/1/2007 Last visit: 10/21/2024 Posts: 16 Rating: (0)	Hello, I must migrate a WINCC V4.1 to WINCC V6.2 and this WINCC V4.1 is using a software add-on called PM AQUA. My question is that is possible to have all the functionalities in WINCC V6.2 which are existing in the PM AQUA today. Thanks in advance.

Suggestion To thank Quote Answer

6/25/2007 12:24 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, for Information of PM Aqua please contact the cossesponding Competence Center. Use the e-mail WinCCAddon.automation@siemens.com maybe the following link will help http://www.industry.siemens.de/wincc/html_76/index.asp?cont=3_6&menu=3
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

6/25/2007 12:44 PM	Rate (0)
pinky Experienced Member Joined: 10/17/2006 Last visit: 1/28/2024 Posts: 97 Rating: (17)	Hi, the last version of PM-AQUA does not work with WinCC V6.x! The official WinCC Addon with PM-AQUA functionality ist ACRON! https://www.automation.siemens.com/hmi/html_76/products/software/wincc_addons/wcc_addon_acron6.htm

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on