Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migration WinCC picture from v6.2 to v6.0

Created by: sunscreen at: 9/1/2008 12:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/1/2008 12:14 PM	Rate (0)
sunscreen Posts: 12 Rating: (0)	Hello, I create one picture in WinCC 6.2. Is it possible to »convert« back to previous version so that I could open it in WinCC 6.0? Best regards,
sunscreen Posts: 12 Rating: (0)	Last edited by: pezi at: 9/1/2008 12:14 PM
Suggestion To thank Quote Answer

9/1/2008 3:21 PM	Rate (0)
Uncle Vanya Posts: 28 Rating: (1)	As I know, there is no any backward compatibility in wincc pictures. I've tried it before without success
Uncle Vanya Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

9/2/2008 7:42 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hello, I never tried that, but you can just copy by hand a *.pdl file to the older version. Maybe it will open. I think you can loose your tag connections, but picture must open. Can't guarantee that, but still it worth a try.
	Best regards, Darius
Suggestion To thank Quote Answer

9/9/2008 12:41 PM	Rate (0)
sunscreen Posts: 12 Rating: (0)	Obviously this is not possible. I create this picture again
sunscreen Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on