Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migration WinCC V4.x ver V6.2

Created by: franckmeister at: 6/11/2008 11:49 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/11/2008 11:49 AM	Rate (0)
franckmeister Posts: 7 Rating: (0)	Hello, 1 - > I search a help in French to migrate a WinCC V4.x application in V6.2 but I have him to find in English... My English is really verysimple and I am not capable has to translate all the documentation. 2 - > One the other thing, I wish to install the version 5.1 of winCC to migrate my application, but the PG-PC industrial is under Windows XP sp2 and V5.1 of WinCC is not compatible with XP. How then I ? cdt Thanks Franck meister Attachment ReleaseNotes_e.zip (64 Downloads)
franckmeister Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/13/2008 6:58 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Franck: 1. The release notes are part of the WinCC installation. So either you install WinCC V5.1 or contact the Siemens technical support for the correct files. The FAQ's in all languages (except English and German) show wrong files! 2. For migrating you have to install the V5.1 on NT or 2000 (if this is supported). I do not see any other way. All the best.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

6/19/2008 2:26 PM	Rate (0)
franckmeister Posts: 7 Rating: (0)	I have reussit has migrated my application, but I have a return of error on the trensfert of the license 4.02 towards the PC... Error 04 Thank you in advance ++
franckmeister Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/19/2008 4:12 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Franck: As before, my advice is, you should contact the Siemens Technical Support for your problem. This kind of problem is highly specific and I doubt you’ll receive a reply in the forum. All the best
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on