Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Milltronics BW500 - erro log 244

Created by: vukhiem at: 1/5/2014 10:51 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/5/2014 10:51 AM	Rate (0)
vukhiem Regular Member Joined: 6/21/2013 Last visit: 7/27/2022 Posts: 13 Rating: (0)	hi Ayman Elotaify, i have a Milltronics BW500 but now it been erro log 244. can you help me? on LED indication "integrator not configured no 2nd speed sensor relay". please tell me how do to repair. thanks!
	Last edited by: CS Moderator at: 1/6/2014 1:07 PM new subject after Splitting from /tf/WW/en/Posts/84718#top
Suggestion To thank Quote Answer

1/15/2014 2:50 PM	Rate (0)
Levelheaded Regular Member Joined: 6/13/2013 Last visit: 8/15/2024 Posts: 24 Rating: (2)	Hello Vukhiem Error 244 is not listed in the BW500 manual, but will be on the next revision. It means that the unit has been programmed for a second speed sensor input but there is none connected. Change the parameters so that there is no secondary speed sensor and the error should clear.

Suggestion To thank Quote Answer

1/23/2014 10:16 AM	Rate (0)
vukhiem Regular Member Joined: 6/21/2013 Last visit: 7/27/2022 Posts: 13 Rating: (0)	thanks for your help! i think too, but i don't find parameter to reset. can you tell me how many parameter?

Suggestion To thank Quote Answer

1/23/2014 10:29 AM	Rate (0)
vukhiem Regular Member Joined: 6/21/2013 Last visit: 7/27/2022 Posts: 13 Rating: (0)	thank thebestweigh, i think same you,but i don't know parameter that. in manual don't listed. can you help me, how to do to find necessary parameter?

Suggestion To thank Quote Answer

2/18/2014 7:41 PM	Rate (0)
Levelheaded Regular Member Joined: 6/13/2013 Last visit: 8/15/2024 Posts: 24 Rating: (2)	Sorry to take so long to get back to this. PAR 270 one of the indexes from 01 to 05would be set to 16. This indexwill need to be changed back to default (0).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on