Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Milltronics BW500

Created by: gendon at: 9/16/2010 4:34 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/16/2010 4:34 AM	Rate (0)
gendon Posts: 13 Rating: (0)	hi, I need manual and parameter list for milltronics BW500 if i want to connect milltronics using profibus to PLC. Regards, gendon
gendon Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

9/17/2010 8:33 PM	Rate (0)
Skeet Posts: 1 Rating: (0)	Hello Gendon, You will need the optionalProfibus-DP Smartlinx card and you can download the GSD file from the following link, http://www.automation.siemens.com/w1/automation-technology-smartlinx-18899.htm#lb-61 Hope this helps, Skeet
Skeet Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/15/2010 11:58 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/22/2024 Posts: 4516 Rating: (840)	Hello, You can download BW500 manual from the following link Milltronics BW500 - Instruction Manual For further information, visit www.siemens.com/weighing Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

10/16/2010 1:27 AM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 12/4/2024 Posts: 1092 Rating: (215)	The manual for the SmartLinx communications card for Profibus DPis 7ML19981AQ03. The read and write parameters used by Profibus are in that manual.
	Last edited by: danw at: 10/16/2010 1:28 AM
Suggestion To thank Quote Answer

10/31/2016 10:41 AM	Rate (0)
nmqh Advanced Member Joined: 5/28/2015 Last visit: 11/7/2024 Posts: 24 Rating: (6)	Attachment Smartlinx module.pdf (515 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on