Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Missing MCC

Created by: Electrical and control eng. at: 5/24/2015 1:05 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/24/2015 1:05 PM	Rate (0)
Electrical and co... Posts: 47 Rating: (1)	dear all when im trying to open EPROM from simatice manager,(file>step7 memory card> open the maseage apear ( EPROM: memory card / MCC missing) why then im trying to open it by simatic field pg m4 by inset this card in spesified slot the masage apear needing to format this MEMORY why Note: cpu 314 Attachment image.jpg (60 Downloads)
Electrical and co... Posts: 47 Rating: (1)
Suggestion To thank Quote Answer

5/25/2015 6:04 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 6/21/2023 Posts: 4617 Rating: (701)	Electrical and control eng. dear all when im trying to open EPROM from simatice manager,(file>step7 memory card> open the maseage apear ( EPROM: memory card / MCC missing) why then im trying to open it by simatic field pg m4 by inset this card in spesified slot the masage apear needing to format this MEMORY why Note: cpu 314 Hello, Have you already seen this: field pg p4 MMC read error - Entries - Industry Support - Siemens or, have you format this MMC with Windows before? Pay attention, never format MMC with Windows http://support.automation.siemens.com/BR/view/en/19515769
	Last edited by: Ste39 at: 5/25/2015 6:07:34 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on