Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Missing text on System diagnostics control

Created by: AutoGen_9805763 at: 6/1/2023 9:24 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/1/2023 9:24 AM	Rate (0)
AutoGen_9805763 Member Joined: 7/15/2020 Last visit: 9/29/2023 Posts: 21 Rating: (0)	Hi. I would like to display PLC events on the HMI screen and I am using a system diagnostic control. But all the text is "##Missing text##" Why ? If I select matrix View: No button does anything. Thanks.

Suggestion To thank Quote Answer

6/1/2023 10:11 AM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 9/29/2023 Posts: 2084 Rating: (315)	Hi, What is the firmware version of your PLC? For a S7-1200 you need at least V4.0, for a S7-1500 you need at least V2.0. Kind regards Stefan

Suggestion To thank Quote Answer

6/8/2023 2:47 PM	Rate (0)
AutoGen_9805763 Member Joined: 7/15/2020 Last visit: 9/29/2023 Posts: 21 Rating: (0)	Hi. S7 1200 v 4.3 or higher.

Suggestion To thank Quote Answer

6/12/2023 9:34 AM	Rate (0)
AutoGen_9805763 Member Joined: 7/15/2020 Last visit: 9/29/2023 Posts: 21 Rating: (0)	Hi. Some help please

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on