Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MMC.ini

Created by: danial at: 6/30/2008 10:24 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/30/2008 10:24 AM	Rate (0)
danial Posts: 31 Rating: (0)	Dear sir, I have SIEMENSE 840D-PL, PCU20, SIMODRIVE611D. Where can I find the file MMC.ini? and how can I access it? Thanks so much for your support. Danial
danial Posts: 31 Rating: (0)	Last edited by: danial at: 6/30/2008 10:25 AM
Suggestion To thank Quote Answer

6/30/2008 10:55 AM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Dear Sir Why would you want to modify this file? MMC.INI does not exist in a HMI embedded Regards SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

6/30/2008 8:03 PM	Rate (0)
danial Posts: 31 Rating: (0)	Hi SteveJ, I would like to try configuring a floppy diskette. this is the story SteveJ. I haveSINUMERIK 840D-PL, PCU20 , OP010. I have floppy diskette (p/n: 6FC5253-0AA05-0AA1) and I have S/W "Network / Diskette" (p/n:6FC5253-0AE01-0AA0). Also i have SHOPMILL ver 6.04(p/n: 6FC5463-6FA20-4AG0) I have commissioned the machine and it works in good manner but I can't install the floppy diskette drive , I have integrated it with PCU20 and powered it with 24 VDC and the documents told me that I can use it through program manager screen by its softkey but I didn't find that then the documents told me that I have to configure the floppy through START-UP --> LOGICAL DRIVE but I didn't the logical drive softkey in start-up screen. Thanks so much. Danial.
danial Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on