Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

mmc

Created by: ala at: 12/20/2008 2:03 PM (9 Replies)

Rating (1)

Thanks 0

10 Entries

12/20/2008 2:03 PM	Rate (0)
ala Posts: 7 Rating: (0)	hi evry body:I have CPU315-2DP AND HAVE MMC . HOW I CAN GET THE PROGRAM INSIED THE PLC FROM MMC .
ala Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

12/20/2008 8:45 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (308)	Hello, If the MMC wasn't empty (there was already a program in it), it is automatically transfered when you power up the PLC. There is no special handling for this. When you make only changes afterwards with your programming unit, they are written automatically to the MMC. This also happens automatically.
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

12/21/2008 4:15 PM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Dear ala, Open new project in the Simatic manager, Connect the PC adapter between your PC and PLC Select PLC from the tool bar and select upload station to PG The it will proceed. Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

12/22/2008 5:42 AM	Rate (1)
Arunakat1 Posts: 217 Rating: (52)	Dear ala Broth edr and Ayman are correct. There is another way if you had a siemens field PG you can read the MMC with it. Just insert the MMC in to card reader slot in PG go to file and open S7 memory card See the attachment But remember do not read your MMC card with normal card reader if you do that you have to through away your MMC. Hope this will help you Thanks Attachment MMC.JPG (555 Downloads)
Arunakat1 Posts: 217 Rating: (52)
Suggestion To thank Quote Answer

12/22/2008 7:45 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hi, Arunakat1 But remember do not read your MMC card with normal card reader if you do that you have to through away your MMC. If you put MMC card into normal reader you just see nothing. Do not format the card with normal reader, because you can't get back to Siemens format. Reading the card will not damage it, but simply you can't "see" what to read.
	Best regards, Darius
Suggestion To thank Quote Answer

1/20/2009 2:41 PM	Rate (0)
ddg Posts: 261 Rating: (42)	Is there any software to activate the option (please see the attachment) in normal laptop with card reader? Regards ddg Attachment s7.JPG (508 Downloads)
ddg Posts: 261 Rating: (42)
Suggestion To thank Quote Answer

1/20/2009 2:54 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Its not possible with "normal" card reader. You must have Field-PG or buy card prommer from Siemens.
	Best regards, Darius
Suggestion To thank Quote Answer

2/1/2009 9:40 AM	Rate (0)
hannibar Posts: 52 Rating: (8)	Hi,ala Why don't you upload it from you cpu?password protected?
hannibar Posts: 52 Rating: (8)
Suggestion To thank Quote Answer

7/31/2009 1:40 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	It's real to read MMC by USB Cardreader and some soft ... You can know the password and unprotect all blocks (include the FC by Siemens)

Suggestion To thank Quote Answer

8/1/2009 7:16 AM	Rate (0)
Arunakat1 Posts: 217 Rating: (52)	protivogas It's real to read MMC by USB Cardreader and some soft ... You can know the password and unprotect all blocks (include the FC by Siemens) Hi, Yes I experience it yesterday my self. As you say it works. But legally it is not recommended to use it. Best Regards
Arunakat1 Posts: 217 Rating: (52)	Last edited by: Arunakat1 at: 8/1/2009 7:18 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on