Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MMC103 HDD problems

Created by: MoonBeam at: 3/18/2012 2:47 PM (14 Replies)

Rating (0)

Thanks 3

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

3/22/2012 7:43 AM	Rate (0)
MoonBeam Posts: 41 Rating: (0)	For all you guys, I have come to conclusion, that I have a problem with Sinumerik MMC software. Therefore I would urgently need system installation disks for Sinumerik v03.06.10 or v03.07.10 system. Can somebody share with me these files; I hope this old software isn't still a top secret, after 15 years... Waiting for anybody’s reply. BR, MoonBeam
MoonBeam Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

3/22/2012 1:22 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (474)	Hello... Thanks for the update....softwares cannot be shared like that as per the Siemens Guidelines doesn't agree.... You can get in touch with your nearest Siemens Office for the software or Your machine manufacturer.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (474)
Suggestion To thank Quote Answer

3/24/2012 9:21 PM	Rate (0)
SI-HACENE Posts: 39 Rating: (0)	hi , see you private message you find what you need. give us news
SI-HACENE Posts: 39 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MoonBeam

1/9/2014 7:50 AM	Rate (0)
MoonBeam Posts: 41 Rating: (0)	After a while I have been checking my old posts, and I realized I have to replay about solution to my problem The problem with user screens not working, was that there was communication MPI/PROFIBUS needed, which was not connected at the time, I was testing my backup. Hope this helps anyone with similar problems! Cheers, Mitja
MoonBeam Posts: 41 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users O_Moderator

2/20/2014 7:32 PM	Rate (0)
Jason. Experienced Member Joined: 7/13/2008 Last visit: 11/10/2022 Posts: 106 Rating: (9)	When I looked at the picture."I wonder if he is doing all fo this on his desk, and it is not connected to the NCU" Good job, finding a hard disk for the older MMC102/103 units is quite a chore. By today's hard disks, they are quite limited on what works well. We use valitek's when customers have backup on valitek, these things survive pretty good in oily machine cabinets. Some are more than 20 years old now. If you look in the toolbox folder on the hard disk of the mmc103, you can see the valitek software there. You can recover that data to a folder on your hard disk, but it is quite dangerous and terrible accident prone to do such things. There is a valitek on ebay right now. I gave mine to a colleauge that uses it more than I. Working on a Nova Sidera spinning machine with FMNC? The parts counter over a million?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on