Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

mnemonic

Created by: wjm1707 at: 2/10/2012 11:12 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/10/2012 11:12 AM	Rate (0)
wjm1707 Posts: 3 Rating: (0)	hello, how to assign a mnemonic to a variable of a DB examples ACQ_DEF -> DB1.DBX2.3 thank you Undo edits
wjm1707 Posts: 3 Rating: (0)
Suggestion To thank

2/13/2012 10:53 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/13/2025 Posts: 4391 Rating: (1462)	Hi, I think that you would like that this DB bit have a simbol name. The only way to get simbolic names for DB variables, is by the DB declaration itself. It means, that if you define a address as Integer, for example, you has a simbolic name for the word, but the bis will not have simbolic name. However, using SCL and inside a FB, you can give multiple names for the same address (or subparts) with command AT.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank

2/13/2012 11:42 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread MNEMONIQUE Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on