8/17/2021 10:36 PM | |
Joined: 9/28/2020 Last visit: 8/13/2024 Posts: 19 Rating:
|
Hey, I sometimes make different systems with a Logo. I just can't figure it out or I don't understand. I have a Victron Cerbo GX and it can be read with modbus. I would like to measure the voltage at the input of my inverter. with this readout I finally want to switch an output of the logo. in the pdf i have a register list with the line i want to read. Can someone explain to me how to read that line? Attachmentmodbus.pdf (886 Downloads) |
8/18/2021 7:43 AM | |
Joined: 9/28/2020 Last visit: 8/13/2024 Posts: 19 Rating:
|
Hello, tank you for your quick response. this is the documentation i have. https://www.victronenergy.com/live/ccgx:modbustcp_faq AttachmentCCGX-Modbus-TCP-register-list-2.70.xlsx (954 Downloads) |
Last edited by: Jondal at: 08/18/2021 07:44:52 |
|
8/18/2021 7:47 AM | |
Joined: 12/18/2014 Last visit: 8/21/2024 Posts: 33603 Rating:
|
And which register(s) want you read? |
8/18/2021 8:08 AM | |
Joined: 12/18/2014 Last visit: 8/21/2024 Posts: 33603 Rating:
|
Try this.
AttachmentJondal.zip (1006 Downloads) |
8/18/2021 8:11 AM | |
Joined: 9/28/2020 Last visit: 8/13/2024 Posts: 19 Rating:
|
thanks for your quick response. I'm going to test it out tonight. I'll let you know if it works. |
8/23/2021 9:01 PM | |
Joined: 9/28/2020 Last visit: 8/13/2024 Posts: 19 Rating:
|
i have change it and it wil work. i wil no try the read out the Input frequency 1. but in think iam doing some wrong again but i dont no what. can somebody help me AttachmentDesktop.zip (1031 Downloads) |
8/23/2021 9:07 PM | |
Joined: 12/18/2014 Last visit: 8/21/2024 Posts: 33603 Rating:
|
Try this. |
Follow us on