Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

modbus in ASCII

Created by: HMZ at: 9/3/2009 9:29 AM (3 Replies)

Rating (0)

Thanks 2

4 Entries

9/3/2009 9:29 AM	Rate (0)
HMZ Posts: 45 Rating: (4)	Hi all, I want to use CP341 as a slave ASCII but I have tow points: 1. Does the MODBUS slave (RTU) copy license (Dongle) serves ASCII? 2. Where I can put the ASCII slave address? (for RTU there was a place to assign slave address) *The MODBUS slave RTU copy license (Dongle) order number is: 6ES7870-1AB01-0YA1 Thanks
HMZ Posts: 45 Rating: (4)	Last edited by: HMZ at: 9/6/2009 8:41 AM Last edited by: HMZ at: 9/3/2009 9:30 AM
Suggestion To thank Quote Answer

9/3/2009 10:00 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Dear HMZ, Perhaps the following link might help: http://support.automation.siemens.com/WW/view/en/25356060 Best regards, Wizard

Suggestion To thank Quote Answer

9/3/2009 8:05 PM	Rate (0)
HMZ Posts: 45 Rating: (4)	thank you Wizard for your reply, actually I saw this page before and I didn't got any such information from the documents also the attached example. if somebody can help regarding these tow question i will be thanks, Just I want to know where I can assign the ASCII slave address.
HMZ Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

9/6/2009 7:02 AM	Rate (0)
HMZ Posts: 45 Rating: (4)	It is solved, thank you Wizard for your help. There are more than one ASCII protocol one is called "ASCII" and the other called "modbus ASCII slave" I was asking for the second one but it wasn't shown on the Parameter Assignment Tool because I didn't download the required drivers. So I downloaded the driver "driver for Modbus ASCII Slave" and the "modbus ASCII slave" is shown now. using the "modbus RTU slave" dongle with "modbus ASCII slave" is not possible.
HMZ Posts: 45 Rating: (4)	Last edited by: HMZ at: 9/6/2009 10:26 AM Thanks to the member in this forum "Sinan!" for his help Last edited by: HMZ at: 9/6/2009 10:20 AM Solved
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard ddg

|

Share this page:

Share this page on...

Follow us on