Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Modbus+ (Modbus Plus) with Wincc

Created by: candyengineer at: 5/6/2008 9:34 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/6/2008 9:34 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Dear Active forum Members & experts , I try to change my customers idea and say "lets change this scada and use SIEMENS wincc" But they use to communicate with modbus+ - modbusplus Is there anyone who has an experience with this PCI-85 ModbusPlus Card (MbxDriver Suite) www.cyberlogic.com I think we will use opc server of cyberlogic, then its ok. Thanks , Best regards
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

5/7/2008 10:04 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, sorry no expierence, but found an FAQ http://support.automation.siemens.com/WW/view/en/21915573
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

5/7/2008 12:20 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Hello April , Thank you very much for your interest but there is only "modbus serial" communication described. I need modbus+ Best regards
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

5/8/2008 12:56 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, contact the allmendinger company. Maybe they have also a channel for Modbus+
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

5/8/2008 1:06 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Hello April , Thank you very much for your interest, I would like to know it if its possible. Because its better to use wincc instead of other scada software... www.cyberlogic.com I think need to contact them, thanks in advance - best regards
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on