Model 353 Controller Course document

Hello,

I am looking for a "Model 353 Controller Course" document, and I am having a very difficult time finding it. Attached is a 2-page section of this document that I received from Siemens. The tech support representative could not find the complete document. Would you by chance have any knowledge as to where I may find the complete document? I am new to this forum and I'm not sure how to do a direct post, so I am replying to your post for some assistance. Thank you.

Dwayne

------------------------------------------------------------------------------------------
Split from REPLACEMENT FOR MOORE CONTROLLER - 353A4F1NNNTNNA4.

Hello Eng4u2c;

First point, if you want to start a completely new thread, open the corresponding conference folder (the list can be found uner Product Conferences in the navigtion bar at the left of this screen), you will find a New Topic button in each conference. See he screenshot below.

Now, the document that you show appears to be a training manual provided by Siemens for registered participants in the various SITRAIN classes.Since the Moore 353 has been discontinued for many years (long enough that the part number does not appear in any search of Siemens products), these training manuals appear to have been discontinued. Unless you can reach someone who has attended these trainings I doubt that you will get your hands on a copy. Even Siemens support could not find them, so that should give you an idea of how rare they can be.

What is still available if you want to research these controllers is a list of manuals from Siemens, and a Siemens Youtube channel that provides a few videos on the Moore 353:

https://support.industry.siemens.com/cs/products?search=UM353&dtp=Manual&mfn=ps&o=DefaultRankingDesc&lc=en-US

https://www.youtube.com/results?search_query=moore+353+digital+controller

One last link: certain resellers provide tech notes for the Moore 353 which could prove useful, such as:

http://www.lesmaninst.com/unleashd/catalog/control/control_pac353_notes.html

Hope this helps,

Daniel Chartier

Daniel,

Thank you very much for the information on how to start a new message thread, and about the Siemens 353 Controller course manual.

Dwayne