Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Modify/external timestamp for alarms

Created by: Norrby at: 12/9/2009 6:03 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/9/2009 6:03 PM	Rate (0)
Norrby Regular Member Joined: 11/4/2008 Last visit: 9/27/2021 Posts: 1 Rating: (0)	Hello! Wonder if someone know if there is a solution for edit the timestamp that is sent to WinCC. I recive timestamp alarms from Siprotec devices on Profibus DP.So I'd like to create alarmsusing this timestamp from Siprotec, but I can't find any function that I can use. Know Siemens Power has a library (SIPROTEC4 7SJ6x over IEC 61850) which does the above on ethernet. Have contacted Siemens support but they avoids my question . So I would be most grateful if someone has any ideas.. /Norrby

Suggestion To thank Quote Answer

12/14/2009 4:36 PM	Rate (0)
little holmes Experienced Member Joined: 12/9/2009 Last visit: 4/18/2024 Posts: 156 Rating: (11)	Hello, I have found an interesting FAQ: http://support.automation.siemens.com/WW/view/en/27201952 Maybe it helps you...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on