Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Modify this code to get from 32 rows of array arthmetic average value

Created by: Beksinski at: 9/24/2014 11:47 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/24/2014 11:47 PM	Rate (0)
Beksinski Posts: 3 Rating: (0)	Hello! Does anybody knows how to modify this code to get from 32 rows of array arthmetic average value? And of course another Outpup value #Average? I must run ASAP the project with calculating average flow of plastics material in hopper loader. Thak you in advance! Code to midify: IF #RST THEN #pw := #pr; #FULL := FALSE; #EMPTY := TRUE; #Dout := 0; #Avarage := 0; ///dodane ELSIF #E THEN IF NOT #EMPTY AND #RD THEN //fifo is empty #Dout := #fifo[#pr]; //get oldest entry out of buffer #pr:= "INC1"(X:=#pr, N:=32); #EMPTY := #pr = #pw; #FULL := FALSE; END_IF; IF NOT #FULL AND #WD THEN #fifo[#pw] := #Din; #pw:= "INC1"(X:=#pw, N:=32); //"INC1"(X := #pw, // #n := #n); #FULL := #pw = #pr; #EMPTY := FALSE; END_IF; END_IF;
Beksinski Posts: 3 Rating: (0)	Last edited by: Min_Moderator at: 9/25/2014 12:09 PM New subject after splitting from /tf/WW/en/Posts/90911#top
Suggestion To thank Quote Answer

10/8/2014 9:50 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/22/2025 Posts: 1929 Rating: (136)	Hello, regarding to the calculation of average see the sample program in the FAQ: http://support.automation.siemens.com/WW/view/en/39333120 With best regards Cicero

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on