Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

modify value in monitoring mode without using VAT

Created by: Marko Bursic at: 10/15/2011 6:53 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

10/15/2011 6:53 AM	Rate (1)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 3/15/2023 Posts: 1410 Rating: (148)	Dear colegues, I am really missing the option to modify variable value during online monitoring. If the variable is declared in symbol table, then with right click on varaiblegives me the option to Modify, so I can modify during onlinemonitoring.When variables are declared in function block (static), I can see the value while monitoring,but there is no chance to modify it - the only way adopted by me is to create a VAT then enter the desired variable and to modify itin variable table. This is very annoying. Another possibility is to open and monitor the instance data block and change actual value and then send entire DB inPLC. Did Imissed some option/configuration for editor that would allow me to change values of variables like for those that are declaredwith absolute address (not dynamicaly like those created in instance DB)? Thanks.

Suggestion To thank Quote Answer

7/19/2013 3:08 PM	Rate (0)
D0D0 Posts: 1 Rating: (0)	I miss such a feature too!
D0D0 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/23/2013 1:06 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	New post splitted to Things which are missing in Step 7 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on