Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Monitor and control

Created by: Manuelzes at: 5/20/2009 9:03 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/20/2009 9:03 AM	Rate (0)
Manuelzes Posts: 99 Rating: (7)	Hy there, i'm bussy with a project and need tags from the plc for my winCC application. The tags are stored in a DB. In the manager i set the option Operator Control and Monitoring on. But in the DB i can not find any option to select witch variables has to control. Dos anyone know of it is possible and if the answer is yes how to do it? Thanks for thinking ME
Manuelzes Posts: 99 Rating: (7)
Suggestion To thank Quote Answer

5/20/2009 8:57 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 3/8/2023 Posts: 703 Rating: (96)	Hello, insidethe DB choose desired variable, its properties and in the Attribute tab insert the "S7_m_c" attribute with value TRUE. In the variable name field the brown flag appears. Then when you use the AS-OS engineering and compile the OS, wizard will help you to transfer the variables as tags to OS. Regards Sydney

Suggestion To thank Quote Answer

5/25/2009 8:55 AM	Rate (0)
Manuelzes Posts: 99 Rating: (7)	Hi, It works fine, Thank you
Manuelzes Posts: 99 Rating: (7)
Suggestion To thank Quote Answer

5/25/2009 8:19 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 3/8/2023 Posts: 703 Rating: (96)	You're welcome

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on