Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Monitor/change variable DB vs. VAT

Created by: Marko Bursic at: 10/23/2016 8:55 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

10/23/2016 8:55 PM	Rate (0)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 1/20/2023 Posts: 1410 Rating: (146)	I still don't understand why a DB monitor lacks the features of VAT. If for example you want to change only one variable in DB, there is no other possibility rather than create a new VAT table, insert the variable and change it from there.

Suggestion To thank Quote Answer

10/23/2016 9:23 PM	Rate (1)
KaushalKumarJoshi Experienced Member Joined: 2/6/2015 Last visit: 11/25/2022 Posts: 56 Rating: (18)	In TIA Portal you can use Ctrl + Shift + 2 to change the variable in online mode in a DB.
	Kaushal Kumar Joshi
Suggestion To thank Quote Answer

10/27/2016 1:53 PM	Rate (0)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 1/20/2023 Posts: 1410 Rating: (146)	WOW, I will try it.

Suggestion To thank Quote Answer

12/2/2016 9:03 AM	Rate (0)
McAndrew Advanced Member Joined: 7/26/2013 Last visit: 1/24/2022 Posts: 32 Rating: (8)	You can modify it directly with DB view while online (by shortcut or right click over variable) opening the pop up window; however is not possible to use typical shortcuts as on watch tables to easily set or reset bits are not available (ctrl+shift+2/3)... at least with V13 SP1 Attachment ModifyOperand.png (183 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on