Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Motion Control errorID 16#8600

Created by: Jicko LS at: 8/17/2016 11:54 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/17/2016 11:54 AM	Rate (0)
Jicko LS Posts: 3 Rating: (0)	Hi I have an error with the configuration of the axis. Error ID: 16#8600 Parameter assignment of pulse generator PTO is invalid Error Info: 16#000B The address is invalid In this problem i don't know what is wrong. I hope you can help me. Best regards. Attachment PTO_1.jpg (129 Downloads)
Jicko LS Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/17/2016 11:55 AM	Rate (0)
Jicko LS Posts: 3 Rating: (0)	Attachment PTO_2.jpg (128 Downloads)
Jicko LS Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/17/2016 11:57 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, which PLC with which FW Version, which TIA Version? Open the Configuration of the Axis and show if there any red cross or Warning mark in the configuration. Regards Christoph

Suggestion To thank Quote Answer

8/18/2016 3:24 AM	Rate (0)
Jicko LS Posts: 3 Rating: (0)	Hi christophD Thank you for answer me. I'm test program on 1214 dc/dc/dc(6Es7-214-1ag40-0xb0) PLC with TIA Portal V13 sp1. I was found errorId 16#8600 and errorInfo 16#000B ,the error about of address is invalid. I tried to change the address in configuration of PTO and Axis,but the problem is remain. Thankyou.
Jicko LS Posts: 3 Rating: (0)	Last edited by: Jicko LS at: 8/18/2016 3:26:02 AM
Suggestion To thank Quote Answer

5/17/2018 7:58 AM	Rate (0)
rawen Member Joined: 5/5/2016 Last visit: 3/21/2022 Posts: 7 Rating: (0)	Hello Jicko LS. How did you solve this problem? I am in the same situation… Thanx, Radek

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC Technology S7-1200

Follow us on