Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MP panel program back up

Created by: ALGUDKAR RAO at: 6/22/2012 8:44 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

6/22/2012 8:44 PM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (9)	Hi friends and experts here is one my doubt we are using MP panel in the project user name and password is not taking.but program back up is there. i know that to open the project back up in PC and transfer it again and fix it. but suppose we dont have the PC. is it possible to install the wincc flexible in MP panel and open the project there and runtime....? and is there communication setting b/w Panel and plc. but i think its not the way.
ALGUDKAR RAO Posts: 621 Rating: (9)
Suggestion To thank Quote Answer

6/23/2012 7:57 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 1/25/2023 Posts: 4377 Rating: (821)	algudkar Hi friends and experts here is one my doubt we are using MP panel in the project user name and password is not taking.but program back up is there. i know that to open the project back up in PC and transfer it again and fix it. but suppose we dont have the PC. is it possible to install the wincc flexible in MP panel and open the project there and runtime....? and is there communication setting b/w Panel and plc. but i think its not the way. Helloalgudkar, You cannot install WinCC flexible on MP. I believe that there were no problem if you have WinCC flexible software. Why you thought to install it on MP itself?
	Ayman Elotaify
Suggestion To thank Quote Answer

6/23/2012 9:04 PM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (9)	Ayman Elotaify algudkar Hi friends and experts here is one my doubt we are using MP panel in the project user name and password is not taking.but program back up is there. i know that to open the project back up in PC and transfer it again and fix it. but suppose we dont have the PC. is it possible to install the wincc flexible in MP panel and open the project there and runtime....? and is there communication setting b/w Panel and plc. but i think its not the way. Helloalgudkar, You cannot install WinCC flexible on MP. I believe that there were no problem if you have WinCC flexible software. Why you thought to install it on MP itself? some one has asked same question to me in customer site i was explained them is not possible so that for my clarificatiopn pupose thank you for the reply
ALGUDKAR RAO Posts: 621 Rating: (9)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayman Elotaify

|

Share this page:

Share this page on...

Follow us on