Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

mp377 19' freezed, no respones

Created by: dirdule at: 8/9/2011 1:12 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

8/9/2011 1:12 AM	Rate (0)
dirdule Posts: 7 Rating: (0)	Hi to you all, I have problem with mp377 - i have downloaded user program in panel and it's worked. Today, when I turn on panel, no response. Boot win CE and after that, show my program, but you cant press any button, no response.How to solve this problem. Thank you all in advance. Dusan.
dirdule Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/9/2011 6:55 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 3/2/2023 Posts: 10221 Rating: (1175)	Hello, Look at How do you do an operating system update (OS update) on operator panels? Try it and after download again the project. Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

8/9/2011 8:46 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 3/26/2023 Posts: 4390 Rating: (824)	dirdule Hi to you all, I have problem with mp377 - i have downloaded user program in panel and it's worked. Today, when I turn on panel, no response. Boot win CE and after that, show my program, but you cant press any button, no response.How to solve this problem. Thank you all in advance. Dusan. Hello, Did you checked that the CPU is in RUN mode? And please check also that the communication is established between CPU and the MP.
	Ayman Elotaify
Suggestion To thank Quote Answer

8/9/2011 11:33 AM	Rate (0)
dirdule Posts: 7 Rating: (0)	Thank you all for answers, the problem was with calibration. I couldnt entry to control panel of device. In user program, I touch and draw finger over screen and panel redirect me directly to calibration. I do calibration and now works fine. Best regards, Dusan
dirdule Posts: 7 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayman Elotaify

|

Share this page:

Share this page on...

Follow us on