mtp1900 keyboard resize

hello,

i hope you are doing well.

How can I resize the keyboard on the mtp1900 unified comfort panel HMI screen?

there are 2 keyboards,neither of which we are able to change size.the floating and default keyboard.

the problem with the difault keyboard is that it takes half the screen display and doesn't allow the operator to see the number being changed in the I/O field of the screen .the keyboard covers the field.

there are no settings in the panel and there is nothing in the manual that helped.

thank you in advanced for your response.

Hi rikard12,

Currently, there is no way to change the size of the on-screen keyboard on a Unified Comfort Panel. This may change in the future as you are not the only customer asking for it.

Kind regards
Stefan

Hello Rikard12,

You can't change the size yet, but the solution for your problem is quite simple:

Newer versions have fixed this issue where you can't see what you're typing.

I upgraded my MTP 700 from V17.00.00.00 to V17.00.00.05 and the issue was gone.

Firmware download
video

Hope this helps you.
-Jelle

thank you for you quick replies.

I currently have the v17.0.0.1 of the mtp1900 unified comfort panel on tia portal

I will download update 5 for winCC unified in hopes of this resolving the issue.

[snip]

Again ,thank you for your responses 

New question published by rikard12 is split to a separate thread with the subject limits of certain I/O field not being displayed when they are selected.

Best regards
Jen_Moderator