Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

multi-instance works in new Step 7 Basic v11 (or Profesional v11) in full range on S7-1200 ?

Created by: il0906 at: 2/11/2011 9:29 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/11/2011 9:29 AM	Rate (0)
il0906 Regular Member Joined: 1/8/2010 Last visit: 9/25/2024 Posts: 12 Rating: (0)	Hi ! Please, does anybody have experience that the multi-instance works in new Step 7 Basic v11 (or Profesional v11) in full range on S7-1200 ? TNX Best regards Igor Splitted from multi-instance DB in step 7 basic.
	Last edited by: O_Moderator at: 2/11/2011 9:43 AM new subject after splitting
Suggestion To thank Quote Answer

2/15/2011 12:50 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, once that there is not yet a offitial "delivery release", it is not possible to give any offitial information about it. However, I saw, in demostrations of preliminary versions, that the multi-instance for S7-1200 will be possible in version 11.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on