Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Multiple picture windows

Created by: Jeffry at: 1/29/2007 9:34 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/29/2007 9:34 AM	Rate (0)
Jeffry Regular Member Joined: 1/29/2007 Last visit: 11/26/2024 Posts: 4 Rating: (0)	Hi, I am using in one page about 10 times the same picture window with a different tagPrefix. Now inside this picture windows there is some text. Now i want to change this text with c-script. I know it is possible when you only use a picture windows one time. But because i use the same picture window multiple times i don't know how to do it. Thanks Jeffry

Suggestion To thank Quote Answer

1/29/2007 10:47 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, please check the following FAQ, because just changing e.g. the text in a single picture window will not be possible. http://support.automation.siemens.com/WW/view/en/23690358 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

1/29/2007 3:19 PM	Rate (0)
Raheel Bronze Member Joined: 8/10/2006 Last visit: 7/15/2024 Posts: 156 Rating: (3)	Hi, I beleive one way to do this is by using absolute object names, the WinCC convention. From your picture window try to printf the name of the object. You can see a big name rather than a small one. Use the whole text every time to reach the same object opened in different picture windows. Hope I get the point wht u wanna do. Regards, RJ

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on