Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

multiranger 200 program

Created by: KhanhLe at: 3/22/2016 7:28 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

3/22/2016 7:28 AM	Rate (0)
KhanhLe Posts: 153 Rating: (9)	hello please tell me what program i can use to configure multiranger 200
KhanhLe Posts: 153 Rating: (9)
Suggestion To thank Quote Answer

3/26/2016 2:35 AM	Rate (1)
danw Gold Expert Joined: 3/28/2010 Last visit: 12/7/2023 Posts: 987 Rating: (202)	- The handheld infrared programmer can be used on any MultiRanger - Siemens' Simatic PDM with a serial RS-232 modem and cable and the correct 'driver' can be used on old or new MultiRangers. Same with PDM with a serial RS-485 modem and cable. - Dolphin was a Windows program developed by Milltronics and reluctantly used by Siemens until 6-7 (?) years ago. It uses an RS-232 connection. Its use can not be guaranteed on newer MultiRangers because of firmware changes for which Dolphin has not been updated. I am not sure what Dolphin's status is with Siemens at this time. It might still be available from a distributor. The newest version MultiRanger (from Jan 2016 with the 4 button (4 arrow) HMI) probably does not need a 'program' because - the configuration is not Pxxx parameter based, it is spoken language oriented. - the HMI display can show an echo profile

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users r_p_williams

12/1/2016 1:17 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4782 Rating: (123)	New question published by r_p_williams is split to a separate thread with the subject Can the old Milltronics Hand Held Programmer be used for the earlier versions of Multiranger 200?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on