Navigation

my counter value is not resetting on Zero pluse

Created by: Danish at: 3/1/2011 5:59 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/1/2011 5:59 AM

Rate (0)

Danish

Posts: 8

Rating:

(0)

Hi Simotion.

I have also configured FM 350-1 in Periodic mode and have a Incremental encoder but my problem is that my counter value is not resetting on Zero pluse. I have checked that my Encoder is giving Zero pulse on each revolution. Please tell mehow you configured it
Splitted from FM350 periodic counting, zero puls resets count.

Last edited by: O_Moderator at: 3/2/2011 9:30 AM

new subject after splitting

3/2/2011 11:19 AM	Rate (0)
SINAMICS_TO Bronze Member Joined: 4/24/2008 Last visit: 8/2/2024 Posts: 213 Rating: (16)	What encoder do you use? 24V or 5V. What control mode do you use and in what main direction you count?

Suggestion To thank Quote Answer

3/4/2011 11:57 AM	Rate (0)
Danish Posts: 8 Rating: (0)	I have 24 V Encoder. I had configured FM-350-1 in Periodic Counting Mode, Control Gate is Software Gate and Main Direction is Normal. My question is that how to configure the FM module which will reset the counter on Z phase Pluse.
Danish Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

Share this page:

Share this page on...

Created by: Danish at: 3/1/2011 5:59 AM (2 Replies)

Rating (0) Thanks 0

3 Entries

Last edited by: O_Moderator at: 3/2/2011 9:30 AM

3 Entries

All about SIMATIC S7-300 / S7-300F

Follow us on

Rating (0)

Thanks 0