Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

n.4 LOGO!8 ethernet problem

Created by: germanoreale at: 7/14/2015 2:30 PM (11 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

7/14/2015 2:30 PM	Rate (0)
germanoreale Posts: 10 Rating: (0)	Buongiorno. Ho una rete con 4 LOGO!8 collegati in ethernet. Ho identificato gli IP dei LOGO! E ho caricato i programmi ad ogni uno. Nella simulazione vedo funzionare le uscite remote, mentre nella realtà non succede. Penso che il problema sia di configurare client/server, master/slave, qualcuno mi può aiutare? Grazie. Good Morning. I have a network with 4 LOGO ! 8 connected in ethernet . I identified the IP of the LOGO ! And I loaded programs at each one. I see in the simulation run the remote outputs , while in reality it does not happen . I think the problem is to configure client / server , master / slave , can anyone help me ? Thanks.
germanoreale Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

7/14/2015 2:38 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	If you want to run a standalone program in all 4 logos, do not set slaves. A slave-logo has no program, but it represents the master their hardware.

Suggestion To thank Quote Answer

7/14/2015 2:56 PM	Rate (0)
germanoreale Posts: 10 Rating: (0)	Ok but i have to put all 4 as a client? ok but I have to put all 4 as a client ? ok but I have to put all 4 as a client ? ok but I have to put all 4 as a client ? Attachment clientserver.png (260 Downloads)
germanoreale Posts: 10 Rating: (0)	Last edited by: germanoreale at: 7/14/2015 2:58:41 PM
Suggestion To thank Quote Answer

7/14/2015 3:04 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	You can exchange data among themselves all four logos. The simplest is always a server / client connection. If you call up diagrams in multi-window mode (up to 3 diagrams), you can drag your connections directly from diagram to diagram. Then the Software creates the connections and the connection lists themselves.

Suggestion To thank Quote Answer

7/14/2015 3:11 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Look at attachment. Attachment test.zip (266 Downloads)

Suggestion To thank Quote Answer

7/14/2015 3:19 PM	Rate (0)
germanoreale Posts: 10 Rating: (0)	ok , but did nothing in the network and can not understand why I had to change the subnet of LOGO !, or the problem is the swicht ? It seems strange because I managed to program with swicht that is 100Mbs that transmit the signal from LOGO ! & is a front . thanks
germanoreale Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

7/14/2015 3:28 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	I now do not understand your problem. What does not? The transfer to the logo? Or communicating the logos with each other?

Suggestion To thank Quote Answer

7/14/2015 3:37 PM	Rate (0)
germanoreale Posts: 10 Rating: (0)	communicating the logos with each other
germanoreale Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

7/14/2015 3:41 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Can you upload your project to the forum as an attachment? You must zip the Project.

Suggestion To thank Quote Answer

7/14/2015 3:43 PM	Rate (0)
germanoreale Posts: 10 Rating: (0)	Tank de subnet mask is not corect Attachment light home.zip (290 Downloads)
germanoreale Posts: 10 Rating: (0)	Last edited by: germanoreale at: 7/14/2015 3:45:10 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on