Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

.NC FILE TO DB

Created by: Rahul Sayre at: 9/22/2011 9:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/22/2011 9:53 AM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 8/20/2024 Posts: 116 Rating: (2)	DEAR ALL, I AM USING POSITION CONTROL MACHINE WITH FIVE AXIS CONTROLLED (POSITION CONTROL) WITH FM 354. I AM USING FM 354 IN MDI MODE. NOW WE ARE GETTING POSITION CO-ORDINATE IN .NC FORMAT. IS IT POSSIBLE TO TRANSFER NC FILE DIRECTLY TO DB. IN PROGRAM I AM USING TWO DB ONE FOR X AXIS & OTHER FOR Y AXIS. IS IT POSSIBLE TO TRANSFER NC PROGRAM TO THESE DB. IF YES THEN PLS TELL WHAT ADDTIONAL SOFTWARE REQUIRED. PLS SEND SAMPLE EXAMPLE IF POSSIBLE. REGARDS, RAHUL

Suggestion To thank Quote Answer

10/1/2011 11:43 AM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 8/20/2024 Posts: 116 Rating: (2)	Dear Expert, I am waiting for reply please revert back if any idea. regards, Rahul

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on