Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

NC Series Startup Backup

Created by: Thiru at: 5/31/2009 4:45 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/31/2009 4:45 PM	Rate (0)
Thiru Posts: 4 Rating: (0)	Dear All, Thank u for your valuable guidance & Support In Our Crank Shaft Centering Machine with Siemens 840D - NCU 572.3, while taking Series Startup Backup, the part programs in work piece directory (WPD) is not coming in the .arc file. all other files such as .TEA, .SPFare available in backup data. Only the .MPF files are missing. what could be the possible reason, is there any NC Machine Data to check, please reply, Thanks & Regards, Ravi
Thiru Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/1/2009 6:35 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (52)	hi just check whether the programs in the WPD are loaded on to NC , the program which are loaded on toNC will only be available in the NC.arc file. regards Ram

Suggestion To thank Quote Answer

6/2/2009 6:56 AM	Rate (0)
Thiru Posts: 4 Rating: (0)	Hi, The programs are loaded to the NC & these arepresently running part programs in the machine. Regards, Ravi
Thiru Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/2/2009 7:34 AM	Rate (0)
sandeep reddy Posts: 92 Rating: (7)	dear sir, are you looking for programs in readable format (i.e. text format)? if so please take back up in text mode using rs232.
sandeep reddy Posts: 92 Rating: (7)
Suggestion To thank Quote Answer

6/2/2009 8:24 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (52)	hi ravi, can you take a NC upgraded archive and check whether the programs are available in the archive. how you are checking the archive file?..use winpcin and slpit the archive and find whether the various sub folders are available with regards ram

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on