Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

NCK battery problem

Created by: shambhu at: 1/22/2009 12:41 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

1/22/2009 12:41 PM	Rate (0)
shambhu Posts: 6 Rating: (0)	Dear sir, Alarm NCK Battery threshold reached is on the display.can you guide me how to change the battery so that no data will be lost.The system is 810D. Regards, Shambhu
shambhu Posts: 6 Rating: (0)	Last edited by: shambhu at: 1/28/2009 6:09 AM
Suggestion To thank Quote Answer

1/22/2009 1:16 PM	Rate (0)
TSH Posts: 73 Rating: (2)	Hello Please supply the type of controller you are using. 810D & 840D have different battery locations Regards
TSH Posts: 73 Rating: (2)
Suggestion To thank Quote Answer

1/23/2009 6:23 AM	Rate (0)
sandeep reddy Posts: 92 Rating: (7)	dear sir, please find the attachment of replacing CCU battery in 810d control. regards, sandeep Attachment ccu batterypdf.pdf (654 Downloads)
sandeep reddy Posts: 92 Rating: (7)
Suggestion To thank Quote Answer

1/23/2009 6:25 AM	Rate (0)
sandeep reddy Posts: 92 Rating: (7)	dear sir, please find the attachment for NCU battery replacement. regards, sandeep Attachment ncu battery.pdf (475 Downloads)
sandeep reddy Posts: 92 Rating: (7)
Suggestion To thank Quote Answer

1/28/2009 5:53 AM	Rate (0)
shambhu Posts: 6 Rating: (0)	Dear sir, It is 810d system.so please tell the process to change the nck battery. Regards, shambhu
shambhu Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2009 6:07 AM	Rate (0)
shambhu Posts: 6 Rating: (0)	Dear sir, The battery problem has surfaced twice in last three months.so i think there may be a problem in the back up circuit or the capacitor. In that case please suggest the way to take back up and the process of changing the battery. Regards, Shambhu
shambhu Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2009 11:09 AM	Rate (0)
sandeep reddy Posts: 92 Rating: (7)	are you using a pcu50 or pcu20 on your machine. if its a pcu50 taking a back up is quite easy. menu select --> start up --> set password --> menuselect --> services --> press the [>] key --> series start up. in this particular menu you get to select the required backups nc,plc etc., and save them and press ARCHIVE. while loading back, select READ START UP ARCHIVE in the same menu and select the required file and press START in pcu20 menu select --> start up --> set password --> menuselect --> services --> data0ut, select the file start up and set the rs232 in binary format. while loading back select datain.
sandeep reddy Posts: 92 Rating: (7)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on