NCM COM 5431 4.6 , Application Associations can't load

Hello,

To configure FMS communication, trying open the menu Edit>Links>Application Association an error message "No free working memory" appear .

This message appear only when trying to open this Application Association and VFD Variable Editor, all other functionality open and work correctly.

Any idea about the reason?

If anybody can share the files in COM 5431 FMS diskette including the <install.exe> file it would be great!

Thanks

Here is the Siemens User Forum, not a shareplace.

If you need old licensed software from Siemens, then start a Support Request.

ixo65

 And what technical is in this post from you?

The technical can be found in the heading and body of the post if read! which is as follows:

"To configure FMS communication, trying open the menu Edit>Links>Application Association an error message "No free working memory" appear .

This message appear only when trying to open this Application Association and VFD Variable Editor, all other functionality open and work correctly.

Any idea about the reason?"

by the way the software I was asking for was without license and is discontinued as the whole support for the S5!

I hope this closes our discussion so that we can focus on the technical issues.