Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need Help with Siemens Simatic S5 PLC

Created by: LillianRoot at: 3/29/2021 6:41 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/29/2021 6:41 PM	Rate (0)
LillianRoot Posts: 2 Rating: (0)	Hello, all, I have a project where we are upgrading an old S5 PLC to something newer (ControlLogix, more than likely), but I have no way to open the S5 project archive I was given. It's a pretty simple application, so I really only need a PDF of the logic/symbols to be able to recreate it. Any suggestions? Thanks.
LillianRoot Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/29/2021 7:22 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 6/7/2023 Posts: 29990 Rating: (3728)	If you want can you upload the S5 archive und i make you PDF.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

3/29/2021 9:35 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, If it is a simple application you should not loose time by trying to translate a old S5 program. Write new program from start is less time consuming and will give better result in the end. Just my 2 cents. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on