Navigation

Need help with the profibus command words of the robicon VDF

Created by: Albes at: 10/11/2018 10:55 PM (1 Replies)

10/11/2018 10:55 PM	Rate (0)
Albes Member Joined: 10/16/2014 Last visit: 5/4/2024 Posts: 1 Rating: (0)	Bob_Harvey This is the only one I have, it has always worked for me. please could you help me with the profibus command words of the robicon VDF, or some example in Step 7 or TIA portal. I am new at this. ------------------------------------------------------------------------------------------ Split from Robicon PH profibus.
	Last edited by: The Helping Hand at: 10/12/2018 8:48:56 AM New subject after splitting
Suggestion To thank Quote Answer

10/15/2018 7:08 AM	Rate (0)
Emlyn @ CHB_Drives Silver Expert Joined: 3/6/2012 Last visit: 12/10/2024 Posts: 155 Rating: (18)	Hi Albes, It will be best to take a good look at the drive communication manual which can be found here; https://support.industry.siemens.com/tf/ww/en/posts/gh-180-nxg-pro-drives-profibus-configuration/181411/?page=0&pageSize=10 Regards, will4
	www.chbdrives.com www.chbdrives.com.au www.chbdrives.co.nz Repairs, Service, Sales Perfect Harmony Robicon GH180 Power Cell Repairs and Refurbishment #repairdontwaste
Suggestion To thank Quote Answer