Need manual for S5 adapter

dchartier

Hello walid;

Look at the attachment below: the S5 adapter is part of the S5 module you want to install in the S7 rack.

To find the information you need, you must know the type of S5 module you want to install, the look for the manual for that module; information on the installation in a S7 rack should be in the appendices.

S5 modules that can be implemented in the S7-400 system using the adapter

https://support.industry.siemens.com/cs/document/4322211/ips-with-adapter-casing-now-also-for-use-in-s7-400-plcs?dti=0&lc=en-FR

Manual for the IP 240, with appendices on the S7 adapter case 

(Manual for IP 240 counting/positionning module, English, MLFB 6ES6998-0TB22 (search for this part number on the web)).

The screenshot below shows the start of the Appendix 2 of the manual for IP 240, installation and configuration of the IP 240 in a S7-400.

Hope this helps,

Daniel Chartier

Hi. Daniel. 

Where i can manual for s5 adapter.?

I need to configure with WF407.

------------------------------------------------------------------------------------------
Split from S5 adapter module configured in S7-400.

Hello TMP;

Please open the first link provided in the reply you quoted, it shows a list of S5 modules that can be used in a S7 rack with a S5 adapter case.

The WF407 is not part of this list.

I have no further information to provide you on the subject. Siemens Support technicians might be able to give you more suggestions, or provide details of an existing replacement module from the S7-400 family.

You can reach Siemens Support using the Support Request link you will find at the top of this page.

Hope this helps,

Daniel Chartier 

Hi Daniel,

Im sorry my wrong typo type, i mean WF706 (positioning module).

so if i want to use the S5 casing adapter  just make dip switch to close.

Thanks, im appreciate for that.