Need program for 2 cylinder

Hello,

I have to run 2 cylinder, one after other.

The goal is when first cylinder go on, the second must be off. So the two cylinder must run one after other , sequential so never both on same time ( the second move forward only when the first cylinder is back to his initial position. Same for cylinder 1, he move forward when the 2 cylinder is to his initial position)

The condition is that operator must use both hand to activate cylinders ( first and second)

Thank you in advance

Hello,

First, thank you for the quick response.

I prepared a scheme how it look the model. Please find on appendix.

The goal is to make program for Log! that run cylinder V1 and V2 one after other, with boths hands on switches.

THank oyu in advance for your help.

Regards.

Hello,

I try to do a simulation, but I cant make run or activate the output ( Q).

I try also to charge the program on logo! but it wasn't possible.

Please, can you help me???

Hello,

thank you for the nice video of simulation, I saw that your simulation work fine but not with me ;-)))

I'm using Logo!Softcomfort(2016-07-14 16-34)

Thank you.

Hello,

I found the way how to run the simulation of your first program. Thank you very much , it run fine.

After detailed check on automate, I found that both hands has only one signal, it means they are linked on the mode that after activation of both hands we have only on signal outcome.

So, on your scheme has to be "only one hand"