Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need Scaling block in TIA Portal V11 for S7 300 PLC

Created by: ssmanku1699 at: 11/29/2013 7:19 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/29/2013 7:19 AM	Rate (0)
ssmanku1699 Experienced Member Joined: 8/10/2009 Last visit: 7/19/2024 Posts: 166 Rating: (2)	Dear ALL , I need a Scaling block in TIA Portal V11 for S7 300 PLC not for S7 1200 / S7 1500. The Input Range and Output Range for this block should be adjustable unlike 27648 . Thanks Sarabjot Singh Manku

Suggestion To thank Quote Answer

11/29/2013 7:36 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Why not to implement it yourself? Output_percent := (Input - Input_range_beg)/ (Input_range_end - Input_range_beg) If you need absolute value Output = Output_percent * (Output_range_end - Output_range_beg) + Output_range_beg
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

11/29/2013 8:41 AM	Rate (0)
ssmanku1699 Experienced Member Joined: 8/10/2009 Last visit: 7/19/2024 Posts: 166 Rating: (2)	DEAR Aret , In my case Input is an Integer and Output is a Real number .. how to proceed for it ? Thanks Sarabjot Singh Manku

Suggestion To thank Quote Answer

11/29/2013 8:49 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Simply transform input to REAL. Generally (not your case) if output is INT just round REAL output.
Aret Posts: 2348 Rating: (264)	Last edited by: Aret at: 11/29/2013 8:51 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on