Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

.net/activex control and alarm server

Created by: xarow at: 6/15/2016 8:33 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/15/2016 8:33 AM	Rate (0)
xarow Posts: 30 Rating: (1)	Hi all, Is it possible to connect a .net/activex control for WinCC to the alarm server and read/write the alarms?
xarow Posts: 30 Rating: (1)	Last edited by: xarow at: 6/15/2016 8:59:26 AM
Suggestion To thank Quote Answer

6/15/2016 6:56 PM	Rate (0)
crazyCow Gold Member Joined: 12/4/2009 Last visit: 12/20/2024 Posts: 453 Rating: (136)	xarow Hi all, Is it possible to connect a .net/activex control for WinCC to the alarm server and read/write the alarms? xarow, that is not possible. You can create/register .NET/ActiveX control, but you'll not be able to talk to tag or alarm logging runtime. Regards.
	If this post actually helped, you may consider using the Rate button above.
Suggestion To thank Quote Answer

1/7/2022 3:14 AM	Rate (0)
whyzix Regular Member Joined: 2/14/2020 Last visit: 1/25/2024 Posts: 24 Rating: (1)	at least, you can talk to tag, read or write if you use .net you can use ITag in Siemens.Runtime.ControlDev.dll if you use ActiveX, you can ask me how to do that. you can just read alarms from HMIRuntime now from the miniweb web page. crazyCow xarow Hi all, Is it possible to connect a .net/activex control for WinCC to the alarm server and read/write the alarms? xarow, that is not possible. You can create/register .NET/ActiveX control, but you'll not be able to talk to tag or alarm logging runtime. Regards.
	Last edited by: whyzix at: 01/07/2022 03:16:26
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on