Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

New 214C DC/DC/DC Does not appear in device list after update 5

Created by: Tony Bell Sovex at: 11/13/2012 12:22 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

11/13/2012 12:22 PM	Rate (0)
Tony Bell Sovex Posts: 1 Rating: (0)	I originally configured the software for a 214 1AE30 0XB0 (V2.2). However I have had a 214 1AG31 0XB0 (V3.0) delivered. When I try to Change Device in the configuration the new PLC does not appear in the device list (214C dc/dc/dc). I have installed update 5 but it is still not on the list. First time with a Seimens PLC and possibly my last.
Tony Bell Sovex Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/13/2012 1:34 PM	Rate (0)
otter Gold Member Joined: 9/30/2005 Last visit: 12/6/2023 Posts: 42 Rating: (12)	Hello, You have to add HSP0026 http://support.automation.siemens.com/WW/view/en/54164095 Succes

Suggestion To thank Quote Answer

3/14/2013 6:45 PM	Rate (0)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 2/9/2023 Posts: 257 Rating: (60)	Hi, I installed update5, too, and the same problem I have. And I download HSP0026, but inside zip file, there is no HSP0026. isp11 file. Do someone know what's going on? BR
	Last edited by: luciferC4 at: 3/14/2013 6:46 PM
Suggestion To thank Quote Answer

3/14/2013 7:26 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/6/2023 Posts: 13982 Rating: (2281)	luciferC4 Hi, I installed update5, too, and the same problem I have. And I download HSP0026, but inside zip file, there is no HSP0026. isp11 file. Do someone know what's going on? BR In the system manual and online help it shows the hardware support pack installation process. Quick overview : 1. download HSP to some known location 2. verify zip downloaded properly 3. TIA Portal / Options / Support Packages / "Installation of Support Packages" / Add from file system. 4. Follow prompts. 5. Restart TIA Portal. Verify HSP installed properly. See #3 above to view installed packages.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users luciferC4

3/14/2013 11:02 PM	Rate (0)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 2/9/2023 Posts: 257 Rating: (60)	Hi Huggy_d1 I found out where is HSP26. The name is: HSP_V11SP2_0026_001_S71200_CPU21x_MAP3_3.0. And this isp11 file is for firmware V3.0 CPU 121xC. Thanks a lot. BR
	Last edited by: luciferC4 at: 3/14/2013 11:02 PM
Suggestion To thank Quote Answer

11/29/2013 10:44 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 11/23/2023 Posts: 2683 Rating: (135)	New question splitted to Update5 of TIA Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on