Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

no access to menu

Created by: magnus at: 8/23/2008 5:17 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/23/2008 5:17 PM	Rate (0)
magnus Posts: 8 Rating: (0)	Hi, when switching on my LOGO! the text messages are displayed. Pressing ESQ fails to display the Menu (with the intention of accessing Menu, to start and stop program, for example). Nothing at all happens. The program is in RUN mode and works fine, but I can only access the MENU by connecting the PC. How should I proceed to access the Menu on the module? magnus
magnus Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/26/2008 2:20 PM	Rate (0)
Fux Posts: 661 Rating: (123)	Do i understand you right that you see the menu if you stop logo with your PC? When logo is in run, are you able to get other screens by using the cursor keys? Do you activate the message text with a pulse generator? Can you give us your program to have a look at it?
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

8/28/2008 10:29 AM	Rate (0)
magnus Posts: 8 Rating: (0)	It is very decent of you to take interest in my little problem. Yes, I can stop the program on the 0BA5 via my computer. Then I see the menu of the 0BA5 display and can again start the program from there. However, then the display freezes again, showing the text message. In the program, the text menu is activated by a permanent HI input (no pulse generator). Maybe the problem is there? I include the program- which regulates a heating system, with a heat pump and water heaters. Please excuse that the program is not very well structured. magnus
magnus Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/28/2008 10:33 AM	Rate (0)
magnus Posts: 8 Rating: (0)	Hi again, uploading of .lsc files were not allowed! which seems a bit strange. I send you a zip instead.magnus Attachment PAC 2.zip (478 Downloads)
magnus Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/28/2008 1:40 PM	Rate (0)
Fux Posts: 661 Rating: (123)	You can not get access to the menu when a message text is displayed. First you have to go to the screen with clock/date by using the cursor keys, then you can press ESC.
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

8/28/2008 3:02 PM	Rate (0)
magnus Posts: 8 Rating: (0)	G- thanks-it was as simple as that. Thanks again for spending so much time, helping me!!! :) magnus
magnus Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on