Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

No communication with CNC 840C

Created by: spiwis at: 1/19/2012 8:04 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/19/2012 8:04 AM	Rate (0)
spiwis Posts: 35 Rating: (0)	Hello all, I have no communication with CNC 840C. I tried to connect with my laptop. I have a partition Fat32 under W2K SP4 and I use the Siemens câble 6fc9344-4ry00-1ad00. I would like to do a backup system Thank you for your help.
spiwis Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

1/19/2012 7:38 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Whar backup do you want take ???? Check this link may be useful /tf/WW/en/Posts/53131 Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

1/26/2012 10:36 AM	Rate (0)
spiwis Posts: 35 Rating: (0)	Hello Ekalavya, Thank you, i follow the link anf find good documentation. Right now, i look for PC Link for Win 95. Can youhelp me it to find it ? After that i'm rezady to do a new test on the CNC. Regards.
spiwis Posts: 35 Rating: (0)	Last edited by: spiwis at: 1/26/2012 10:36 AM
Suggestion To thank Quote Answer

1/26/2012 12:30 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Check this link http://support.automation.siemens.com/WW/view/en/46201990 Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on