Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

No connection to data server" on server PC

Created by: Bheja at: 1/11/2008 6:56 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/11/2008 6:56 AM	Rate (0)
Bheja Posts: 18 Rating: (0)	Hi everybody, I am facing a very strange problem & i need a help for same. The problem is as described below, We have supplied client/server configuration to one of our client. The plant is already commissioned & working fine. We haveretrivedthe projectbackup from siteon my workplace PC & we geta message "no connection to data server" on server project when putting on a runtime on local PC. please suggest a remedy if anyone had faced such kind of problem in past. Bhejas
Bheja Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/11/2008 11:16 AM	Rate (0)
Pravin Patil India Posts: 22 Rating: (0)	Hi Bheja, I had faced the same problem. But My Wincc Version is V 5.1 In V6.0 onward there is no problem. I got solution by replacing the rt.db of my project. But in this case you will loose the archieved data till date. New fresh archiving will start. If you are also working with V5.0 or V5.1 then write me I will explain you how to replace the rt.db. regards Praveen Patil
Pravin Patil India Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

1/11/2008 2:38 PM	Rate (0)
Bheja Posts: 18 Rating: (0)	Hie, Thanks a lot for replying. But problem isversion ofWinCCis 6.0 SP3 in my project. If you have any idea for above version of WinCC, it would be a real help to me. Bheja
Bheja Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/14/2008 8:36 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/20/2025 Posts: 8808 Rating: (1173)	Dear Bheja, Have you seen these faq's: http://support.automation.siemens.com/WW/view/en/22101889 http://support.automation.siemens.com/WW/view/en/16720071 Perhaps they are useful Best regards, Wizard

Suggestion To thank Quote Answer

1/15/2008 4:12 AM	Rate (0)
Bheja Posts: 18 Rating: (0)	Dear Wizard, Iwent thorugh both the FAQs & I run CCArchivemanager.exe -reset all to reset all archive connections. But final result is, i am stillgetting same error. Ialso checked the sql server enterprise manager, in which it shows all archives are linked after putting WinCC project in runtime. regards, Bheja
Bheja Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on