Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

no license key available

Created by: ling780915@yahoo.com.tw at: 8/22/2013 8:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/22/2013 8:27 AM	Rate (0)
ling780915@yahoo.... Posts: 6 Rating: (0)	Dear all: when i run SCADA HMI show a system alarm message how can i improve it?? i have the pictures the message show :No License Key available. WinCC logging for runtime advanced Attachment 542199_642653299085715_170985533_n.jpg (678 Downloads)
ling780915@yahoo.... Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/22/2013 8:35 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 1/15/2025 Posts: 5697 Rating: (715)	Hello, You need to install the correct license, please read What information is available about licenses for WinCC (TIA Portal)? You can also contact your local Siemens rep. for help on this. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

8/22/2013 9:07 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Hello, When you use WinCC Advanced Runtime and you want to log "Alarms" or "Data" You need the additional license "WinCC Logging for Runtime Advanced" When you use an operator panel which can archive "Alarms" or "Data" then you do not need an additional license. Best regards, Wizard

Suggestion To thank Quote Answer

10/18/2016 12:25 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by helloheaven is split to a separate thread with the subject Purchase WinCC Login, is additional RT license necessary. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on