Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

No option for TP700 Comfort Panel in TIA V12?

Created by: Jch360 at: 1/28/2014 1:40 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

1/28/2014 1:40 AM	Rate (0)
Jch360 Posts: 22 Rating: (0)	I am extremely new to Siemens PLCs. I am building a project for an existing site to create a backup, but come to realize that in TIA portal V12 I do not have the option for the TP 700 Comfort panel under the HMI list. I got my version of portal from a trainer kit. Is this not a complete version of the software or do I have to import a patch or add-on? Any advice would be greatly appreciated. Attachment D:\tmp\download\Automation_HMI_Panel.jpg (294 Downloads)
Jch360 Posts: 22 Rating: (0)	Last edited by: CS Moderator at: 1/29/2014 11:21 PM Attachment reattached
Suggestion To thank Quote Answer

1/28/2014 8:23 AM	Rate (1)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (701)	Hello, To program a TP700 comfort you need at least Wincc Comfort V11, do you have that installed? Check Installed Software and let us know. Regards, Marcjan
	Last edited by: Marcjan at: 1/28/2014 8:24 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

1/28/2014 12:48 PM	Rate (0)
Jch360 Posts: 22 Rating: (0)	Thanks for the info. It does not look like I have any version of WinCC installed on my PC. Would I be better off to purchase WinCC comfort advanced or professional? I appreciated the help, like I said earlier I am a major newby.
Jch360 Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

1/30/2014 10:33 AM	Rate (0)
bartolo Regular Member Joined: 9/26/2013 Last visit: 11/5/2022 Posts: 3 Rating: (0)	WinCC Professional is scada My advice as a newbie, take a look here: http://www.automation.siemens.com/salesmaterial-as/brochure/en/brochure_simatic-wincc_tia-portal_en.pdf

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jolanneatto2201

|

Share this page:

Share this page on...

Follow us on