Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Node setup

Created by: HELPDESK_2015 at: 10/6/2023 2:57 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/6/2023 2:57 PM	Rate (0)
HELPDESK_2015 Advanced Member Joined: 12/7/2012 Last visit: 10/12/2024 Posts: 25 Rating: (0)	Hello I change my laptop and i install xworks and abt site on it. Sinced I changed it, I cn't do node setup in xworks and I can't assign the DDC in AbtSite. Anyone have an idea, please?

Suggestion To thank Quote Answer

10/9/2023 6:04 AM	Rate (0)
amk_ Advanced Member Joined: 3/1/2018 Last visit: 11/8/2024 Posts: 58 Rating: (24)	Hi, Please check settings in pg/pc interface. It should be like in picture attached. Attachment pg-pc.png (308 Downloads)
	Best regards,
Suggestion To thank Quote Answer

12/9/2023 7:30 AM	Rate (0)
r_manikandan24 Joined: 12/9/2023 Last visit: 1/12/2024 Posts: 1 Rating: (0)	Hi , I am also facing same issue . i refer the image but all settings correct only . if there is any other idea???

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on