Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

numerical values are not refresh on Mp277 touch panel

Created by: Allan27 at: 10/12/2012 4:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/12/2012 4:59 PM	Rate (0)
Allan27 Posts: 2 Rating: (0)	Hello, I use the following software: -Totally Integrated Automation Portal V11 SP2 -Step7 Professional V11 SP2 -WinCC Advanced V11 SP1 In my projet i've got : -a PLC CPU 315-2 PN/DP -4 cards DI16xDC24V -2 cards D016xDC24V -2 cards AI8x12bits (param PT100) - HMI MP277 touch panel - connexion DP-Mastersystem PROFIBUS On the HMI i saw the digital values moving, but my numerical values are not moving. Numerical values are only refreshed when the view is uploading. Do you have any suggestions? Thank you.
Allan27 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/15/2012 12:25 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 10/4/2024 Posts: 4349 Rating: (1446)	Hi I suggest the follow tests: 1 - Compile the software with rebuild all function. 2 - Check the tags and IO settings - One test is to drag and drop another variable from PLC ladder to MP screen. 3 - Check parallell, if the value changes also in Watch table.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

10/16/2012 8:14 AM	Rate (0)
Allan27 Posts: 2 Rating: (0)	Hi, The drag and drop test is successful. My value was setted as Input Mod instead of Input/Output. Thank you for you helping. Problem resolved.
Allan27 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on