Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OB Problem

Created by: Ammu at: 3/17/2009 7:34 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/17/2009 7:34 AM	Rate (0)
Ammu Posts: 59 Rating: (0)	Hi I'm using PCS 7 V7.0 Sp-1. In that whenever i'm calling any block in CFC, by default blocks are getting inserted into OB 100. But whenever i call block, bydefault it should get call in OB35. Is there any setting is to be made to call the blocks bydefault in OB 35.???
Ammu Posts: 59 Rating: (0)
Suggestion To thank Quote Answer

3/17/2009 8:45 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hello Look at How can you achieve even distribution of load in the CPU by changing the runtime properties? regards

Suggestion To thank Quote Answer

3/17/2009 9:12 AM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 12/4/2024 Posts: 917 Rating: (63)	Hi cepl, CFC blocks are placed in OB35 by default if you didn't changed position. Each CFC create automatically a RuntimeGroup during chart creation and keep their own runtime group position. How RunTimeGroup works and how you can set it is descibed in "PCS 7 - Configuration Manual Engineering System" PCS7 online manual (chapter 8.11.3.9 in PCS7 SP2 manual), search for "runtime group" to see other explanation in same manual Regards

Suggestion To thank Quote Answer

3/17/2009 9:33 AM	Rate (0)
Mario Braganca Posts: 124 Rating: (17)	Hello all OB100 is a Startup Organization Block. PCS7 Blocks are installed in the cyclic OB (OB35, for instance) but also in OB100. Regards Mario Herzog Braganca
Mario Braganca Posts: 124 Rating: (17)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on