Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ODK functions

Created by: brant at: 4/1/2008 11:15 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/1/2008 11:15 AM	Rate (0)
brant Posts: 3 Rating: (0)	I’m using ODK to get variables and alarmas from WinCC. For getting the variables I use the function DMEnumVariables and I develop the callback function that returns all the variables in Wincc. The DMEnumVariables is call from a pdl:ret = DMEnumVariables(szProj,NULL, MyDMEnumVarsCallback, pvUser, &Error);and the callback function is in the global script. Everything compile and works.Now I want to get all the alarms inside the alarm logging thus I use the ODK function MSCSEnumLine that I call from a pdl like before:ret = MSCSEnumLine(hProjHandle, MyMSGEnumLineCallback, pvUser, &Error);Where MyMSGEnumLineCallback is the callback function that is in the global script. But when I compile the script in the pdl appears one error:Undefined identifier MSCSEnumLine.Anybody knows what I’m making wrong? Thanks
brant Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/8/2008 3:47 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Hi, Open the following link for contact details about odk They respond very fast and have a good knowledge ! with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

4/8/2008 4:14 PM	Rate (0)
pinky Experienced Member Joined: 10/17/2006 Last visit: 1/28/2024 Posts: 97 Rating: (17)	Hi, maybe you have to include the mscsapi.h and in the path..\WinCC\aplib you can find all header files of wincc ODK. The function MSCSEnumLine is a function off the configuration system and you have no access to messages of an alarm control. Furthermore the function MSCSEnumLine is a function which enumerates all message line templates. This templates were used in WinCC V4. The best help you get from the link postedby Ikkezelf.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on